Thursday, September 22, 2011

How do I go about suppressing injector noise off a Cummins N14 in my mobile HF radio equipment?

In my mobile hf equipment in my semi I get a very loud buzz that follows the engine rpm's. The radio is a RCI-2950, I'm using it for 10/11 till I can get propper Hf equipment. I brought it up to my company and they cleaned the batter terminals and changed my alternator. I also installed a filter on the power leads for the radio and a ferrite choke on the extension speaker wires. Someone suggested I put them on the leads for the injector pumps but on the ratshack web site all the comments were that they would do no good. My vhf fm radio does not pick this noise up nor does my music radio. The noise coming from the radio is not only annoying but almost loud enough to hurt your ears even with the volume down, can anyone point me in the right direction as to how to curb the ringin in my ears.How do I go about suppressing injector noise off a Cummins N14 in my mobile HF radio equipment?
As a ham, I figured you would have tried some of the ham related websites in regards to noise abatement on HF



Step one is Ratshack is how can we sell a cell phone for you today? They basically got out of the real electronics business years ago.. I find their customers sometimes don't understand certain principles unfortuneately



Check this website out:

http://www.k0bg.com/noiseid.html and try to follow some of the hints.. another thing may be a small DSP filter which some have found to help with noise.



If you are having the issue, you may want to ask your mechanic to see if Cummins has come out with a bulletin about the noise (as other truckers would be moaning about the issue interfering with their cb radios also)

2001 F-150 Supercrew 4x4 Alternator Question?

2001 F-150 Supercrew 4x4 5.4L V8 124K miles

I changed out my Alternator the other day and now my truck stumbles a bit right around 1200-2000 RPM. Past that every so often once I am at cruising speed on the highway and can feel her jerk a bit...kind of like a hiccup and then it's fine for a while and than another hiccup.Also my RPMs jump a little during idle. Any Ideas of what this might be and how to correct the issue?2001 F-150 Supercrew 4x4 Alternator Question?
Fords are very fickle about wiring layouts and connectors. It is imperative that you have the wiring laid out exactly as it was from the factory...including the connections...they must fit factory tight. If all that is in order...it might just be going thru a relearning process which could take up to 50 miles. Fords are the worst vehicles around when it comes to any electrical problems. Best of Luck to you!!

My Car Belt Keeps Squealing??

T make a long story short I have a 1988 mercury grand marquis colony park wagon. It onl has 50,000 original miles. Not a bad car, but ever since we changed the alternator, the belt began squeaking badly. Then we realized that the belts were bad, and we replaced the belts.



Soon, it started squealing again as the new belt got broken in and loser. We kept tightening up the alternator, because it was coming from that belt {and that was really the only thing we could tighten up}, but now the alternator is tightened all the way and it keeps squealing. It only happens when it is cold and you have too many things on, like the radio and the headlights on at the same time, with the heat.



The car is power everything, and I don't think its the alternator {Its a regular 65 amp alt. not a high charging one.}. I bought some belt conditioner, but I have to spray it on every day for it to stop squealing.

Any ideas on how to fix it without getting a new belt?My Car Belt Keeps Squealing??
The belt tensioner for the alternator is messed up. Change it. What's happening is that the belt keeps getting elongated because the tensioner is causing the belt to drag and the belt will fail again shortly because of this. A new one doesn't cost much or get it from your junk yard.My Car Belt Keeps Squealing??
misalighned beltMy Car Belt Keeps Squealing??
either your belt is a tad too big, or one of your pulleys are misalighned.

I'm thinking about changing pickups on my guitar. Any advice?

First and foremost know that this is the first guitar I ever owned. I've had it for more than ten years and I'm really sentimental. It's an Ibanez AX120 and is one of those really-quality-but-inexpensive guitars. I've recently thought about putting better pickups in to make it even better. Right now I have the standard Axis AH1 at the neck and AH2 at the bridge. If I swap out, I'm more than likely going with Gibson humbuckers (at least that style, anyway). There are several layers to my question:



1) Are there any dangers in doing this? Do I risk really screwing up my %26quot;baby%26quot;? And by %26quot;screwing up%26quot; I mean both the performance of the guitar (risking electrical problems? Does the design of the guitar influence how a pickup will perform?) and the appearance of the guitar (I don't want it to end up looking like a tinkering high schooler got a hold of it).



2) Is this easy enough to do on my own? I'm not a mechanic or luthier, but I'm no dummy either and would prefer to save the money if its difficulty may be equivalent to, say, changing an alternator in a car.



3) I'm open to brand and product suggestions. What I have in mind is the standard Gibson Les Paul- or SG-style humbucker, in a silver/chrome plating. Actually . . . it has to be chrome or black in color, but that shouldn't be a problem to find. Any other brands I should look into for that style humbucker? (I'm not interested in single coil--I already have a telecaster for that).



4) It appears that the two pickups on my guitar currently are slightly different (AH1 vs. AH2). Does this mean I need to buy two different kinds of pickups? Or can I just buy two of the same kind, and then their position on the guitar will make all the difference?I%26039;m thinking about changing pickups on my guitar. Any advice?
Okay, let's do this point-by-point.

1) There are some dangers, as in everything else, but not many. You don't actually have to damage the guitar or the pickups to change them out. The only real risk is if you don't connect the wires properly, in which case it could suddenly lose the connection and go silent.



2) It should be. All that really has to be done is to take off whatever cover in on your particular guitar (I'm not totally familiar with that model, but I think it's just the pickup ring?), pull the pickup out far enough to work with it, and either de-solder the pickups leads from the selector switch and ground or cut the wires. Then you put in you new pickups, either solder the leads where the old ones went or splice the wires (by twisting them together, soldering them, and covering the connection with electrical tape), and reattach the cover/pickup ring. If you don't have a soldering iron, and can't borrow or buy one, then this is probably not a good thing to do yourself.



3) I recommend you check out seymourduncan.com. They have a section of their website called the tone comparison chart. Find humbuckers in the list, and look at the options. It will tell you the impedance of all their pickups models, and a simple tone guide. The impedance is how %26quot;hot%26quot; the pickups is; the higher it is the more output power the pickup has. As for the tone, each pickup will show a Bass/Middle/Treble chart. Very straightforward to compare. For example, I'm looking into getting a Duncan Distortion pickup, which has a readout of 7/8/9 by that chart, meaning it has strong highs, softer mids, and lower but still strong bass presence. See? So if you wanted, say, a lot of midrange, find one that says 5/8/7 or something. I don't know your preferred tone, but I usually recommend the Duncan JB for people who play clean to mid-gain, then Duncan Distortion to people who use a lot of distortion, and the Duncan Alternative 8 for people who use fuzz effects. DiMarzio also makes excellent pickups, but I don't know much about them, so I can't make any recommendations.

I think the chrome cover is actually a separate piece, so you can keep the ones you aleady have and just change the pickup under it, but I may be wrong about that.



4) Usually, neck pickups have lower output, because a pickup closer to the middle of the string has more to pick up. But most of the tone difference you hear is because of the position relative to the string, so if you put two identical pickups in the bridge and neck positions, they aren't going to sound the same. Most pickups (including Gibsons and Duncans) come in a bridge version or a neck version, though.



I hope this helped. If you have any more questions you can reach me at zephirwynd@yahoo.com.
  • advice for avoiding violations
  • myspace pages
  • How long will my 1989 toyota celica st last?

    I know with proper maintenance it could last a very long time. Its already at 250,xxx miles and is running good still. Changed the muffler, alternator, have oil changes and more. I just want to know true opinons of how long the car can last.How long will my 1989 toyota celica st last?
    Well, you are doing pretty well now. Are you burning any oil? If not, just keep changing it every 3-5k and make sure you get the timing belt changed (if applicable) and I bet you can get another 100K. Just baby the baby.How long will my 1989 toyota celica st last?
    I agree with everything PhilGee said. Provided that you aren't burning much oil (1 quart every 1,500 miles or less is not good, for example). Also, if your engine seals are good, that helps. My aunt has a 1997 Toyota Rav4 4 cylinder with 4wd that she stopped driving after 318,000 miles. But you'll have to decide how many miles is %26quot;far enough%26quot; for you.

    Drive belt squeals when A/C is running...?

    99 Jeep XJ, my drive belt squeals something awful when my AC runs, I recently changed my alternator and in the process discovered how to adjust the drive belt... so I tightened it to where I thought it would stop squealing when AC is on, it is worse.... I can't beleive tightening it doesn't fix the problem, I need a new belt don't I?Drive belt squeals when A/C is running...?
    You could have over tightened it. If it is all run off one belt, try taking some vaseline and VERY CAREFULLY put it on the belt when its running. If it stops squeaking then yes a new belt will likely stop the squeaking. If not you need to investigate your belt tensioner, and idler if you have one, the pulley on your power steering pump and you ac clutch. One of them is most likely squeaking from a bad bearing.Drive belt squeals when A/C is running...?
    It might be the tensioner or the a/c compressor clutchDrive belt squeals when A/C is running...?
    Maybe, or an new A/C compressor.Drive belt squeals when A/C is running...?
    You surely need a new belt, but I would check the pully and tensioner to make sure you don't have a bearing out.Drive belt squeals when A/C is running...?
    if over tighten you wil do more damadge to costly componentsDrive belt squeals when A/C is running...?
    If the belt is truly tightened correctly, then yes you do.

    Double check to make sure it didnt slip a bit as you were tightening it, I am not familiar with your particular application but I cant believe it doesnt have an automatic tensioner, is it positioned properly?Drive belt squeals when A/C is running...?
    not necessarily so try rubbing a bar of soap on the belt (with the motor not running or spray some WD40 on the belt with the motor running --- KEEP YOUR HANDS CLEAR OF THE FAN OR YOU MAY LOSE A FINGER OR WORSE -- GOOD LUCK and happy motoringDrive belt squeals when A/C is running...?
    I would agree with KOOLSTER=D, you need to be sure the belt has proper tension, but not too much tension. Over tightening it can cause damage to your accessories and could be the reason for the squeal.

    How often should the Alternator Belt and the Timing Belt be changed?

    I have a Toyota Corolla 2004 LE edition. In order not to run into problems, how often should I get the Alternator and Timing Belt changed? Every 5 years? I know this seems like a very obselete question, but I want to make sure my car is in good shape. It currently has 42,290 miles on it and it's 3 years old.How often should the Alternator Belt and the Timing Belt be changed?
    Timing belts are 80k-100k miles depending on driving conditions.



    Alternator Belt ....???



    Toyota I can only assume is like Nissan, Honda, %26amp; VW in that they check belts and hoses as part of their maintenance every 10k miles. Those would be changed as needed but at 42,290k miles your car would have gone through a lot if it already needs these items changed but every car has its kwirks.How often should the Alternator Belt and the Timing Belt be changed?
    The recommended time to change your timing belt is every 60,000 miles. If you wait until it breaks, you will be replacing an engine instead. Since replacing the timing belt entails remove all of the other belts first, it would be a great time to replace the accessory belts at the same time. Rack time is expensive.How often should the Alternator Belt and the Timing Belt be changed?
    Do you have the 4 or 6?

    A good way to tell is look at it, if it has small cracks or glazing it needs to be replaced. The cracks will be in the V side not the smooth side.

    If you have a 4 cyl then you have a timing chain, the V6 has a belt, if it breaks there is no motor damage that is not a interference motor.How often should the Alternator Belt and the Timing Belt be changed?
    if you have a 4 cylinder engine you have a serpentine belt and it should be changed about every 50k or as needed, and 4 cyl. has a timing chain not a belt. if you have a v6 then you have two drive belts that should be changed 50k or as needed, and the timing belt should be changed every 90k or as needed.How often should the Alternator Belt and the Timing Belt be changed?
    Once a yearHow often should the Alternator Belt and the Timing Belt be changed?
    Starting in 1998, Corollas went to a timing CHAIN. Theoretically, you should never have to change it,



    The accessory belt (serpentine) should be inspected every oil change to be safe and changed when cracks appear.How often should the Alternator Belt and the Timing Belt be changed?
    They dont make a 6 cyl corolla, and corolla's use a timing chain from 98 on up.How often should the Alternator Belt and the Timing Belt be changed?
    The local Toyota shop recommends changing the timing belt every 60k in hot climates like Texas. The timing belt (not to be confused with the alternator/water pump/compressor belt) is covered and thus is not readibly viewable. If the timing belt breaks, all the valves are bent in a second and the engine has to be rebuilt. Is is about a $3000 job vs. a $100 belt.How often should the Alternator Belt and the Timing Belt be changed?
    omg seems like no one read the instruction booklet

    there is a part on the book talking to mantenience in that part will tell you when you have change it and corrolla dont use timing belt, they use timming chain that you never need to change( in 10years will stretch only 3/16 inch) then change it



    for the alt belt look for some scratchs and loose parts, or cracks if you look one of these then you have to change it